Bringing Images To Life!TM

Joto Auto Release ClamShell Heat Press 16" x 20" Demo Model


Demo Model With 1 year Warranty
Lightly used for in-house demonstration purposes.
Please note that demo equipment sales ARE FINAL.
Ships from Vancouver warehouse only
While supplies last

With Joto's new auto clam heat press, it is not necessary to wait by the press, while the transfer is pressed.  Simply close the press, and it will auto open once the timer counts down to 0.  This press is also equipped with a warning sound when the transfer is done.

The Joto AutoClam Press is fully digital with a manual pressure adjustment knob.  This heat press is ideally suited for pressing thin sublimation items as well as heat transfer flex.


  • Fully digital Temperature and Time controls
  • Magnetic Auto Open Feature
  • Space Saving Clam Shell Design
  • Adjustable Pressure
  • Max temperature of 410F (205C)
  • Temperature can be display in Celsius, or Fahrenheit
  • Platen Size Available in 16" x 20"

 Demo models are not always available. Please call 1-800-565-5686 to check availability.

Select platen size

Reg. $1,295.00
Not available.
Add to Cart

Need to speak to someone?
M-F 7:00am-4:30pm PST

Machine Type:    Auto Release Clam Shell    
Platen Size:    16” x 20”  or 15” x 15”
Under Plate:    Exchangeable
Controller:     GY-06 Digital Time & Temp Control    
Printable Materials:    Up to 0.2" (5mm) Thickness
Opening Angle:    50°
Gas Spring Control:    Yes
Voltage:    120V/220V
Power:    1750W/1800W
Time Range:    0-999 sec
Maximum Temp:    491°F (255C)
Temperature Accuracy:    ±0.5%
Packing Size:    16" x 20" model (540mm x 880mm x 570mm)
Gross Weight:    115lbs (52kg)   

Joto Offers the following warranty to our presses:

  • Lifetime technical support on all heat presses.
  • One-year warranty on entire press & parts.
  • Five-year warranty on castings and welds.
  • Five-year warranty on heat platen.


Turning On Your Heat Press
Turn the Main Power Switch on. The Main Power Switch is at the right side of the heat press.
Current temperature, set temperature, current time, set time will display.

How to Read The Display

  1. Right side PV value = Current Temperature
  2. Left side PV value = Current Time
  3. Right side SV value = Set Press Temperature
  4. Left side SV value = Set Press Time

Setting Press Temperature

  • Press OK to start. Use the up and down arrows to choose to display in °F or °C.  °F stands for Fahrenheit, °C stands for Celsius
  • Once selection is made, press ok to save.
  • Green set temperature value will flash.  Use the up and down arrows to set press temperature value. Press ok to save

Note: Setting the press temperature to above 200C may cause a fire hazard.

Setting Press Time

  • Green Set Time Value will flash. Use the up and down arrows to change the value.
  • Press ok to save the value.
  • Wait until the current temperature is the same as the set temperature before using.
  • The press will beep once set temperature is reached. Close and open the press to stop the beeping