Bringing Images To Life!TM

20oz White Stainless Steel Tumbler with Straw & Lid

B-TBR-10-S60001-WH

Add your design to the great tumbler.

Size: 20oz/600ml

Sold in Packs of 5

Ships from Vancouver, BC warehouse

Qty
Price per pack
1
$65.55
2-4
$63.85
5-14
$58.65
15+
$55.90

Need to speak to someone?
M-F 7:00am-4:30pm PST
1-800-565-5686

Temperature
330F (165C)
Time
80 seconds

Mug Press instructions:

Temperature: 330F (165C) | Time: 80s

  1. Print your design. Don't forget to mirror.
  2. Secure your transfer to the tubmbler using heat  resistant tape. The transfer should not extend past the edges of the tumbler.
  3. Place the tumbler inside a mug press. Press it for 80s at 330F.
  4. Remove the tumbler carefully. Remove the transfer immediately.
  5. Let tumbler to cool down

Convection Oven Instuctions:

Temeperature: 320F (160C) | Time: 6mins

  1. Print your design. Don't forget to mirror.
  2. Secure your transfer to the tubmbler using heat  resistant tape. The transfer should not extend past the edges of the tumbler.
  3. Place the tumbler inside the shrink wrap centering it as best you can.
  4. Use a heat gun on low setting to shrink the wrap to the contour of the tumbler, it is best to start on the side away from the transfer first.
  5. Continue steps 2 through 4 for each item you wish to sublimate in the production run.
  6. When the items are ready place them into a preheated convection oven.
  7. Once the item is finished sublimating the shrink wrap can be removed. It may break into smaller pieces that just have to be pulled off the item.

 Testing might require depending on your equipment.