Bringing Images To Life!TM

17oz Stainless Steel Coke Shaped Bottle

B-BTL-WH17-ST

White/Silver Color is sold out and will be available in May

The stainless steel water bottle is of high quality lasting several years of use. Its inner bottle is made from food grade 304 stainless steel. 17 ounce capacity is perfect for staying hydrated while behind a desk at work, at school or spending time outdoors. It is easy to clean, fill, and drink from. What's more, the attractive silver or white color is great for men, women and kids of all ages, and fits in with any color scheme.  Hand wash only.

The vacuum insulated thermal bottle is rated 12 hours for hot liquids and 24 hours for cold liquids.

Printing Method: 
2 in 1 Mug Press - Water Bottle Element
5 in 1 Mug Press - 11oz Mug Element with green heat shield
Convection Oven  - Requires a Mug Wrap

Available in the following Warehouses:
Vancouver BC, Mississauga ON

Select your color

Qty
1-24
$10.50
25-49
$10.15
50-249
$9.66
250+
$9.10

Need to speak to someone?
M-F 7:00am-4:30pm PST
1-800-565-5686

17oz Coke Bottles from JOTO
Sublimatable stainless steel coke shaped bottles from JOTO. These vacuum insulated thermal bottles keep liquids hot for 12 hours and cold liquids for 24 hours. Its inner bottle is made from food grade 304 stainless steel. Available in White, Silver and Mint Green. Subscribe to our eNews to be the first to know about new products and promotions. Follow the link below: https://confirmsubscription.com/h/t/0E76AEFB9A67C7BB

Size: 17oz/500ml capacity
Dimensions: 2.8'' x 10.2'' / 7*26cm
Color: White or Silver

Equipment
Joto Mug Press
Temperature
360F
Time
60-75 secs
Peel
Hot
Pressure
Light

If imaging the coke bottle with a 5 in 1 mug press, you will need the green heat shield
Simply tape your image onto the coke bottle, wrap the green heat shield around the bottle.  Place in mug press with 11oz mug element. Please remember to take the bottom support off the mug press station so you can maximize the height of the image you can print
Press at 360F for 110 seconds.  Maximum image height is 3.3in.  Leave a 0.5in margin between the water bottle gap and the bottom of the image.

 

If imaging using the Joto 2 in 1 Mug Press.   Please use the waterbottle element.  Press at 360F, for 60-75 secs.
Alternatively, you can use the 11oz mug element using a green heat shield, press at 360F, for 110 seconds.